The thin, self-adhesive heating mat
The energy-saving underfloor heating system
T2Red With T2Reflecta
The thermal insulation and aluminium plates reducce heat losses and provide an even heat distribution.
T2QuickNet
The T2Red with T2Reflecta system is the first choice for wooden or laminate floors and is recommended by many wood flooring manufacturers. It can be adapted to all room sizes and can be installed on most subfloors.
This system combines the self-regulating T2Red heating cable with T2 Reflecta, the pro-grooved, thermally insulated, aluminium-coverd plate. It provides extra energy saving of 20% or more. (It even achieves energy savings up to 65% during the heat-up phase).
It can be installed on all subfloors (plastic, concrete, wood) - in dry or wet areas - and it can be easily adapted to all room sizes and shapes
CeraPro
T2Red
The intelligent underfloor heating system
The T2Red self-regulating system senses other hear sources sush as solar radiation, electrical appliances and lighting and it automatically adjusts its heat output accordingly.
More heat is produces in colder areas - such as under rugs and furniture. There is no risk of over heating which gives unlimited flexibility formoving furniture around.
The ultra-thin, robust heating cable solution
It can be installed on all stable subfloors including cement, screed, insulation board (Isolecta) and wooden subfloors. CeraPro is particularly useful fo irregular shaped floor areas and is applicable for bathrooms, kitchens and conservatories.
CeraPro is the ideal solution for installation in tile adhesive directly under the tiles. The cable is only 3mm thick which makes it perfect for renovation projects where the height of the floor cannot be adjusted.
There is a Raychem smart underfloor heating solution for every situation: renovation & new construction
The thin T2QuickNet mat is ideal solution for renovation - especially for tile floors. The ultra-thin (3mm) mat is laid directly in the filler or tile adhesive.
It can be installed on all subfloor which are sufficiently insulated and conforming to applicable building regulations.
T2QuickNet exists in two versions:
- T2QuickNet go can be used on all solid subfloors
- T2QuickNet 160 when more output and a faster heat up time is required
T2Blue
The flexible underfloor heating cable
The flexible underfloor heating cable is the first choice for complex ground plans in renovation. T2Blue can be installed on all conventional and stable substructures. The heating cable is embedded in the leveling compound, screed or concrete, with the floor covering on top.
T2Blue is available in two power outputs:
- T2Blue 10W/m is used for standard floor constructions
- T2Blue 20W/m is the preferred solution in areas where higher power is required
Isolecta
The energy saving insulation board for a faster heat-up of
T2 QuickNet, T2Blue and CeraPro
The specially designed insulation board is the ideal solution for achieving a fast reaction time and a high level of thermal insulation for your heated floor in combination with T2QuickNet heating cables. It significantly reduces the heat-up time and achieves energy savings up to 65% during the heat-up phase.
It is fully compatible with most proprietary tile adhesives and filler material and its low height make it can ideal system for renovation projects.